The NORVI EC-M12 is designed for remote sensing jobs where conventional power and wired communications are difficult or costly. All configurations share the idea of low-power field measurement with local storage and cellular data transmission, but the available sensor interface changes with the model.
What is common to the platform?
The EC-M12 platform uses an STM32L072 low-power microcontroller, SIM7070 cellular modem, IP67-rated enclosure and a dual-cell battery system with a stated combined capacity of 38,000 mAh. Local microSD storage supports buffered measurements. Connectivity options include LTE-M and NB-IoT, subject to regional carrier support and the installed modem/SIM configuration.
How the five configurations differ
| Model | Sensor interface | Example task |
|---|---|---|
| A | Two 4–20 mA inputs | Pressure or level transmitters |
| B | One RS-485 interface | Compatible Modbus field sensor |
| C | Two digital inputs | Discrete state or pulse monitoring |
| D | One digital + two analog inputs | Mixed-status and process-signal sites |
| E | One strain-gauge interface | Load or force sensing, subject to availability |
See each configuration on the NORVI USA EC-M12 product landing page, then request an application-specific quote. Models are not automatically interchangeable: the number and signal type of field inputs must match the installed sensors.
What determines battery runtime?
Nominal battery capacity is only one part of the power budget. Transmission frequency, modem registration, signal quality, sensor excitation, temperature and microcontroller sleep current determine real service life. A measurement transmitted once per day may have a very different energy budget from one transmitted every minute.
For reliable deployment, create a duty-cycle budget and verify it with the manufacturer or an integrator before making lifetime commitments to the customer.
Network and server considerations
- Confirm LTE-M / NB-IoT coverage at the actual installation site.
- Verify supported cellular bands, APN settings and SIM service.
- Define the receiving endpoint, payload format and authentication method.
- Plan what happens if cellular service is absent for several days.
- Decide the sampling, storage and transmission schedule.
What to include in a request for quote
Send NORVI USA your model choice, sensor output, installation country/state, quantity, reporting interval, estimated project deployment date and destination platform. If you have a sensor datasheet, mention the model and electrical requirements. Request an EC-M12 quotation.