4–20 mA vs 0–10 V: Choosing Industrial Analog I/O
Two common industrial analog signals are 4–20 mA current loops and 0–10 V voltage outputs. They are designed for similar kinds of…
Read guide →Two common industrial analog signals are 4–20 mA current loops and 0–10 V voltage outputs. They are designed for similar kinds of…
Read guide →The NORVI EC-M12 is designed for remote sensing jobs where conventional power and wired communications are difficult or costly. All configurations share…
Read guide →An industrial human-machine interface (HMI) and a remote data dashboard can display many of the same measurements. Their purpose, however, is often…
Read guide →Remote tank-level monitoring is a useful example of a full industrial IoT system because the correct hardware depends on the tank, not…
Read guide →Ordering a modular controller starts with more than a CPU. You need a repeatable bill of materials (BOM) that matches real signals,…
Read guide →One attraction of an ESP32-based industrial controller is the ability to prototype with familiar embedded-development tools. That convenience should not eliminate industrial…
Read guide →A modular controller is attractive because you can order the CPU and I/O functions separately. It also means the product list must…
Read guide →Modbus is a common way to exchange measurements and control values between industrial devices. The two widely used variants—Modbus RTU and Modbus…
Read guide →When you select an industrial controller, the processor is only part of the decision. Network access, field I/O, serviceability, power and software…
Read guide →